This can identify most products and recommend possible solutions
How does We use product data collected with this service?
Support for Offline Printer
Example: "Envy 5055"
Hp mfp 1202w printer offline
By Roger Mick 0 Comments
Troubleshooting is a technique for locating and fixing printer problems. If your hp neverstop laser mfp 1202w printer offline to operate properly or shows an error message, determine the cause of the fault and follow the prescribed troubleshooting procedures.
Some of the most frequent printer failures, such as paper jams, ink issues, wireless setup errors, offline printers, and scan issues, are caused by insufficient printer maintenance and installation. HP provides an online troubleshooting tool called the HP Print and Scan Doctor. Additionally, you may consult the user’s handbook for specific troubleshooting solutions.
How to fix hp neverstop laser mfp 1202w offline to online
After unpacking the HP Neverstop MFP 1202w printer, remove the essential supplies, including the input tray cover, USB cable, power cord, input tray, CD-ROM, and user handbook.
Remove the printer’s protective tapes and covers.
Ascertain that you have removed both the orange handle and the black sheet stored within the printer.
Load some plain paper into the printer’s paper input tray stand.
Adjust the guide-width settings in the input tray as necessary and cover it with the paper input tray cover.
The printer comes pre-installed with the HP Black Original Imaging Drum.
Connect the printer’s power cable to an electrical socket.
After connecting the power cable, the HP Neverstop MFP 1202w setup immediately powers on.
Following that, either uses the CD-ROM to install the printer software or download the driver from the official HP website.
Verify that the printer operates properly after installing the software.
Utilize Wi-Fi Direct for mobile printing.
Apple devices can print remotely from the device to the printer through the AirPrint capability.
If you see the message ” Printer is offline ” on your computer screen, do the troubleshooting procedures listed below.
To begin, verify that the HP Neverstop MFP 1202w configuration is disabled.
If so, switch it on and delete any print jobs that have been trapped in the queue.
Navigate to the Windows Control Panel on your PC.
pick ” Printers and Scanners ” or ” View devices and printers ” from the menu bar.
Ascertain that the HP printer is set as your default printer.
Right-click on the HP Neverstop Laser MFP 1202w printer icon in the Printers folder and choose Printer Properties from the drop-down menu.
Navigate to the Ports tab in the Properties window.
Verify that the WSD Port checkbox is enabled.
Open Windows Services if it is chosen.
Identify the Function Discovery Provider Host and the Function Discovery Resource Publication.
Following that, verify the Status and Startup Type.
If the services are not started and the Startup Type is set to manual, browse to Properties and change the Startup Type to Automatic.
Click the Start button, followed by OK, under Service Status.
Reopen the Windows Control Panel and go to the Devices and Printers box to verify the status of the printer.
If the issue continues, produce a report on the network configuration.
Click the Ports tab in the Printer Properties box.
Select the Standard TCP/IP Port from the Add Port menu.
Select the New Port button and enter the port’s credentials from the network setup report.
If the issue persists, contact our technical support staff through the Call button located on this page.